Ubiquiti EdgePoint Gigabit Router (8 ports) EP-R8

Out of stock

Ubiquiti Networks introduces the EdgePoint, part of the EdgeMAX platform. The first application-specific designed WISP control point, the EdgePoint combines the advanced routing capabilities of EdgeMAX with fiber backhaul and versatile powering capabilities. The EP-R8 is a layer-3 router with powerful routing features such as load balancing and fail-over to provide redundancy and increase the performance for outdoor wireless links.


  • All-in-One Design: A single, compact controller eliminates clutter, expensive cabinets, and excessive maintenance.
  • Robust Construction: The ruggedized case withstands outdoor conditions including wind and snow. Included cable sleeve protects cables and openings.
  • Routing Features: Including VLAN interfaces, static router, DHCP, QoS, NAT rules, and all you need for a robust set-up.

The EP-R8 EdgePoint WISP Gigabit Router from Ubiquiti is designed to simplify your hardware by replacing the networking cabinet, which usually contains a patch panel, power rack, multiple PoE adapters, switch, router, modem, and more. It is encased in a die-cast aluminum alloy polycarbonate shell with UV resistance and features a combination of robust routing performance, fiber backhaul capability, and the convenience of passive PoE support. With the EP-R8, you'll have access to a total of eight ports: six 10/100/1000 RJ45 ports with 24V / 0.7A passive PoE, and two 10/100/1000 RJ45/SFP combo ports with 54V or 24V / 1.4A passive PoE. Furthermore, use the EdgePoint software, accessible via a network port and a web browser, to monitor and manage your network.

Tech specs

  • Enclosure Characteristics: Diecast Aluminum Alloy and Polycarbonate with UV Resistance
  • Max. Power Consumption: 40W (Excludes PoE Output)
  • Power Input: (1) DC Terminal Block or (2) RJ45 (PoE In and eth0)
  • Power Supply: Min. 54V / 0.8A (Excludes PoE Output Power)
  • VDC Input: 54VDC, 6A
  • Power Monitoring: (1) DC Terminal Block, Input Power ; (2) RJ45, PoE In and eth0, Input Power
  • Supported Voltage Range: 56 to 42VDC
  • Serial Console Port: (1) RJ45 Serial Port
  • PoE In Port: (1) RJ45 Port
  • Data Ports: (6) 10/100/1000 RJ45 Ports ; (2) 10/100/1000 RJ45/SFP Combination ports
  • Processor: Dual-Core 600 MHz, MIPS64 with Hardware Acceleration for Packet Processing
  • System Memory: 2 GB DDR3-1600 RAM

Box Contents

  • EdgePoint Router
  • Wall-Mount Bracket
  • (2) Metal Straps
  • Cable Sleeve
  • Gigabit PoE (54V, 1.5A) with Mounting Bracket
  • Power Cord
  • Quick Start Guide
Write Your Own Review
You're reviewing:Ubiquiti EdgePoint Gigabit Router (8 ports) EP-R8
Your Rating