Product Features:
-
CONTROL UNIT
-
Compatible With Most Universal Remote Controls (including satellite)
-
Non-Volatile Memory – Holds Locations During Power Failures
-
Automatic Synchronization Ensures Pinpoint Position Accuracy
-
Direct Access via TV Channel Number or Digital Compass Location
-
Unobtrusive Control Blends With Any Décor
-
DRIVE UNIT
-
One-Piece Cast Aluminum Housing
-
Heavy-Duty Rotator Motor
-
Wind-Tested Brake Pads
-
Durable Powder-Coat Paint Finish
-
Precision-Cut Gear System
-
Built-In Steel Thrust Bearings
-
With 12 channels memory station keys, 2 digital displays:1 for channel station indicator, 1 for direction indicator.
-
Manual key controls rotation to antenna.
-
Power operation returns to o automatically.
-
One touch choice.
-
Memory function continues to function when power is off.
-
Operation with infrared remote control and manual. Remote range is the same as for TV, about 10 meters.
-
Learn key: have the function to measure the time of driver running at one cycle.
|
Model#
|
AR-500 plus
|
|
POWER SOURCE
|
120VAC, 60HZ, 26W
|
|
MOTOR
|
18VAC
|
|
ROTATION
|
360 °± 10°WITH MECHANICAL STOP
|
|
ROTATION TORQUE
|
182 kg-cm (160LBS-IN) MIN.
|
|
ROTATION TIME
|
80 SEC.
|
|
VERTICAL LOAD
|
36 Kg (99 LBS) MAX.
|
|
MASTER SIZE
|
28 ~ 44.5 mm (11/3 ~ 1 ¾”) DIAMETER
|
|
CABLE
|
3 CORD
|
|
DIMENSION (mm)
|
300x200x185 (GIFT BOX)
|
|
WEIGHT (g)
|
3900 (INCLUDING GIFT BOX)
|
Additional Information:
A Rotor or Rotator is a mast-mounted, motor-driven device that permits the TV viewer to conveniently rotate (orient) the outdoor antenna in any direction to optimize reception of a desired TV channel. A rotor should be considered when TV signals are being derived from broadcast towers in different directions and a single antenna cannot accommodate all locations.
A rotator consists of two parts: 1) an indoor control unit, and 2) an outdoor drive unit. The two are connected via a multi-conductor wire that carries the voltage and control signals from the indoor unit to the outdoor drive unit.
